Powerstation for the jobsite

Power without diesel: portable storage for demolition, lighting, welding and dewatering — single-phase, or with 400 V three-phase.

Load first, equipment second

Count the tools that run at the same time, not the ones sitting in the yard.
Read the input power off each rating plate and add them up.
Add 20 to 30 percent headroom. Motors and compressors draw several times their rated current when starting.
Check whether any equipment needs 400 V three-phase. That decides the configuration, not a bigger single-phase unit.

One unit, two units, three units

A single unit covers hand tools and lighting at moderate load, and one person can carry it.
Two units in parallel double both output and usable capacity — the usual step when cutters and other loads run together.
Three units in a three-phase bank deliver 400 V for equipment that will not start without it, and spread the load across three enclosures.

P-series parallel power systems

One modular platform. Add parallel units where the load grows — two or three units single-phase, or three units for 400 V three-phase.

Configuration	Units	Rated power	Usable capacity	Weight	Output
P25	1	2,500 W	2.7 kWh	29 kg	230 V / 16 A · single-phase
P25 + P25-D	2	5,000 W	5.4 kWh	≈60 kg	230 V · single-phase · AC230V/20A output
P25 + P25-D	3	7,500 W	8.1 kWh	≈90 kg	230 V · single-phase · AC230V/30A output
P25 + P25-T	3	7,500 W	8.1 kWh	≈90 kg	400 V · three-phase · AC400V/10A output

P25
Units
1
Rated power
2,500 W
Usable capacity
2.7 kWh
Weight
29 kg
Output
230 V / 16 A · single-phase
P25 + P25-D
Units
2
Rated power
5,000 W
Usable capacity
5.4 kWh
Weight
≈60 kg
Output
230 V · single-phase · AC230V/20A output
P25 + P25-D
Units
3
Rated power
7,500 W
Usable capacity
8.1 kWh
Weight
≈90 kg
Output
230 V · single-phase · AC230V/30A output
P25 + P25-T
Units
3
Rated power
7,500 W
Usable capacity
8.1 kWh
Weight
≈90 kg
Output
400 V · three-phase · AC400V/10A output

Wiring

The parallel distribution unit carries one power input and one data input per battery unit, and a single output to the load.

AC230V/20ATwo P25 units, 230 V single-phase.
AC230V/30AThree P25 units, 230 V single-phase.
AC400V/10AThree 230 V P25 units in parallel make 400 V three-phase — all three required, or the system loses a phase.

How the parallel link is wired

Each P25 runs one power cable and one data cable to its own input pair on the distribution unit.
The distribution unit has three input pairs (L1 / L2 / L3); one pair per battery unit.
Only the distribution unit output feeds the load. Battery units are never connected to the load directly.
Each unit keeps its own protective device; no unit back-feeds another.

Three configurations, one platform

Start with a single unit and add parallel units only when the load demands it. Every configuration runs the same battery unit and the same distribution unit.

P25
The core unit. A fanless, self-cooling 230 V power station that replaces the combustion generator on site — no exhaust, no idling noise, no fuel run.
Key figures
Rated power
2,500 W
Peak power
5,000 W (≤10 s)
Usable capacity
2.7 kWh
Output
230 V · 16 A
Protection
IP54
Weight
29 kg
Request a quote
P25 + P25-D
Two or three units linked through the parallel distribution unit for 230 V single-phase loads. Power and capacity stack — start with two, add a third when the job needs it.
Key figures
Units
2–3 × P25
Rated power
5,000–7,500 W
Usable capacity
5.4–8.1 kWh
Output
AC230V · 20–30 A
Request a quote
P25 + P25-T
Three 230 V P25 units in parallel produce the 400 V three-phase supply that runs tools which will not start on single phase. All three are required — remove one and the system loses a phase. Carried and assembled by hand: no crane, no lifting gear.
Key figures
Units
3 × 230V P25
Rated power
7,500 W
Usable capacity
8.1 kWh
Output
AC400V · 10 A three-phase
Request a quote

Feature overview

Every part, numbered on the real machine — the same order as the wiring diagrams above.

P25 — the workhorse unit

Hitama P25 site power station front port panel: AC output socket, AC charging input, power switch, battery display, USB-C, solar input, parallel power and data ports — Port panel

AC output · 230 V / 16 APlug cutters, welders and drills straight in.
AC charging inputOn grid power, charge it overnight.
Power switchOne turn starts the station.
Battery displaySix LEDs — charge readable from the doorway.
USB-CKeeps phones and laptops topped up.
Solar inputFit a panel, keep charging on site.
Parallel power portPower line to the P25-D / P25-T box.
Parallel data portData line — the units stay in sync.

Hitama P25 portable power station three-quarter view: carry handle, IP54 enclosure, 2.7 kWh battery body — Body

Carry handle29 kg — carried by hand to the load.
IP54 enclosureDust-protected, spray-water protected.
2.7 kWh batteryUsable capacity per unit, fanless.

P25-D — 230 V parallel box

Hitama P25-D parallel distribution box front view: mounting hook, AC230V-30A output, breaker protection window, six parallel input ports — Front

Mounting hookHang the P25 units on the box.
EnclosureThe parallel box — ready out of the crate.
Parallel output · AC230V-30AThe only feed to the load.
Mounting stopHolds the box in place on the ground.
Protection device areaThe breakers, behind a protected window.
Parallel 1 inputP25 No.1 power line — AC230V-10A.
Parallel 1 data inputP25 No.1 data line.
Parallel 2 inputP25 No.2 power line — AC230V-10A.
Parallel 2 data inputP25 No.2 data line.
Parallel 3 inputP25 No.3 power line — AC230V-10A.
Parallel 3 data inputP25 No.3 data line.

P25-T — 400 V three-phase box

Hitama P25-T three-phase parallel box front view: mounting hook, AC400V-10A output, breaker protection window, six parallel input ports — Front

Mounting hookHang the P25 units on the box.
EnclosureThe three-phase box — ready out of the crate.
Parallel output · AC400V-10AThree-phase — the only feed to the load.
Mounting stopHolds the box in place on the ground.
Protection device areaThe breakers, behind a protected window.
Parallel 1 input · L1P25 No.1 power line — AC230V-10A.
Parallel 1 data inputP25 No.1 data line.
Parallel 2 input · L2P25 No.2 power line — AC230V-10A.
Parallel 2 data inputP25 No.2 data line.
Parallel 3 input · L3P25 No.3 power line — AC230V-10A.
Parallel 3 data inputP25 No.3 data line.

Optional accessory

Put the sun to work. A 400 W folding panel clips into the P25 solar input — charge on site, no mains. Parallel two of them: 800 W into the station.

Hitama 400 W folding solar panel for the P25 — unfolded four-section panel, folded case with orange handle, and a 3 m MC4 cable

Optional

Folding Solar Panel 400 W

One panel, 400 W. Folds flat, carries by hand, plugs into the P25 solar input. Parallel two panels — 800 W charging the station together.

Max. power (Pmax): 400 W
Voltage at Pmax (Vmp): 72 V
Current at Pmax (Imp): 5.56 A
Open-circuit voltage (Voc): 86.4 V
Short-circuit current (Isc): 5.89 A
Max. system voltage: 1000 V
Connector: MC4
Frame: ETFE
Protection: IP54
Weight: 9.1 kg
Size, folded: 612 × 590 × 50 mm
Size, unfolded: 2230 × 590 × 25 mm
Operating temperature: -40 °C to +70 °C
In the box: 3 m connection cable

Request a quote

For dealers and rental fleets

OEM and ODM: we work with partners on such projects — from custom logo printing to an adapted configuration.
Custom logo printing is available.
Tell us configuration, voltage and volume; we confirm feasibility, any tooling required, and the lead time.

Why not diesel

No exhaust: usable in halls, tunnels and below ground, where combustion engines are ruled out.
No refuelling, no oil changes, no cold starts in frost.
No engine noise — the point where night work and residential areas fail.
Fanless cooling with no air intake, so dust has nothing to clog.

Datasheet and dealer terms

Technical data, conformity and transport conditions are in the datasheet. To size a system for your case we need three things: where it is used, which tools it runs, and whether three-phase is required.

Frequently asked questions

The questions buyers actually ask before a first order — answered with numbers from our own datasheets, not from a brochure.

What distinguishes a jobsite power station from a diesel generator?

It burns nothing: no exhaust at the point of use, no engine noise, no refuelling. That makes it suitable for interiors, tunnels, trenches and night work — cases where a combustion unit may not even be placed.

Which loads typically run on a construction site?

Lighting, hand tools, extraction, chargers and electronics form the base. Welding sets, compressors and water pumps come on top when starting current and voltage match — with three-phase loads, configuration decides, not size.

How do I size the system?

Count the loads that run simultaneously, add their input ratings, and plan 20 to 30 percent reserve for starting currents. The number of tools standing on site is the wrong basis.

Can the system be expanded later?

Yes, through parallel operation. A second unit is added instead of replacing the first — the cheaper strategy for rental, because the base equipment stays in the fleet.